Ironwood-electronics GHZ LGA Socket (-M) Assembly Instructions Uživatelský manuál stáhnout pdf

Socket

Top Assembly

Compression Screw

Compression plate

BGA Package

Z-Axis Angle Elastomer

Note: Do not remove.

It is placed in a specific

orientation and attached

to the four corners using

special adhesive.

Socket Base Assembly

Machine Screw

Socket Lid

GHZ Socket (-M)

Assembly Instructions

Tele: (800) 404-0204

www.ironwoodelectronics.com

1. Place LGA package (land side down) into the socket. NOTE: LGA orientation on target PCB is critical.

2. Place the compession plate on top of the LGA package.

3. Install the socket top assembly with the hardware provided (four 0-80 screws).

4. Turn the compression screw clockwise, until it makes contact with the compression plate.

5. Turn an additional 1/8th to 1/4th of a turn.

page 1 of 1

Filename: GMI.mcd, Rev C, 6/26/01, IP

GHZ Socket (-M) 1

Shrnutí obsahu

Strany 1 - GHZ Socket (-M)

SocketTop AssemblyCompression ScrewCompression plateBGA PackageZ-Axis Angle ElastomerNote: Do not remove.It is placed in a specific orientation and at

Komentáře k této Příručce

Žádné komentáře

Ironwood-electronics GHZ LGA Socket (-M) Assembly Instructions Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Ironwood-electronics GHZ LGA Socket (-M) Assembly Instructions. Ironwood Electronics GHZ LGA Socket (-M) Assembly Instructions User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Hardware Ironwood-electronics GHZ LGA Socket (-M) Assembly Instructions