Ironwood-electronics GHZ BGA Socket (Surface Mount) Assembly Instructio Uživatelský manuál stáhnout pdf

Socket

Top Assembly

Compression Screw

Compression plate

BGA Package

Z-Axis Elastomer

Socket Base Assembly

Machine Screw

Target PCB with SMT pads

Socket Lid

Alignment plate

GHZ BGA Socket (surface mount)

Assembly Instructions

Tele: (800) 404-0204

www.ironwoodelectronics.com

1. Reflow Socket Base assembly to the target PCB (see page 2 for reflow profile).

2. Place the square piece of elastomer provided into the socket base (rotation and 'side up' orientation are not critical).

Adjust the elastomer to sit into the alignment plate cavity.

4. Place BGA package (solder ball side down) into the socket. NOTE: BGA orientation on target PCB is critical.

5. Place the compession plate (if required*) on top of the BGA package.

6. Install the socket top assembly with the hardware provided (four 0-80 screws).

7. Turn the compression screw clockwise, until it makes contact with the compression plate or the BGA package.

8. Turn an additional quarter-turn.

*Ironwood Electronics technical staff will determine (from your package spec) if a compression or alignment plate is required

page 1 of 2

Filename: HSI.mcd, Rev A, 1/18/00, IP

1 2

Shrnutí obsahu

Strany 1 - Assembly Instructions

SocketTop AssemblyCompression ScrewCompression plateBGA PackageZ-Axis ElastomerSocket Base AssemblyMachine ScrewTarget PCB with SMT padsSocket LidAlig

Strany 2

Komentáře k této Příručce

Žádné komentáře

Ironwood-electronics GHZ BGA Socket (Surface Mount) Assembly Instructio Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Ironwood-electronics GHZ BGA Socket (Surface Mount) Assembly Instructio. Ironwood Electronics GHZ BGA Socket (Surface Mount) Assembly Instructions User Manual [it] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Hardware Ironwood-electronics GHZ BGA Socket (Surface Mount) Assembly Instructio